X Series E83 X3 2.0d (N47) OFFRD
22 31 001
Replacing rubber mount for transmission
mounting
Special tools required:
•
22 1 011
•
22 1 014
•
22 1 016
•
22 1 021
•
33 3 144
Necessary preliminary tasks:
•
Remove complete exhaust system (N52K only)
•
If necessary, remove heat shield.
•
Support transmission with hydraulic lifter.
Unfasten screws and remove transmission cross-member.
Tightening torque 27 00 10AZ
.
Position special tool 22 1 016 on opening (2) and twist in
screw (3) hand-tight against housing.
Pull out rubber mount with special tools 22 1 011 /
33 3 144
and nut (1).
Nut (1) = M 12x1.5 nut
RA Replacing rubber mount for transmission mounting
BMW AG - TIS
05.02.2013 23:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -