X Series E83 X3 2.5Si (N52K) OFFRD
Unpin cables (1) issuing from lever-type sensor on blue plug
using special tool 61 0 307 from special tool kit 61 0 300 .
Note:
Plug connection on fuel pump must not be disconnected!
When the fuel pump is replaced, the cables and the blue plug are
included in the delivery specification.
Press retaining lug (2) together simultaneously in direction of
arrow and detach fuel line (1) from pressure regulator.
Unlock quick-release fastener (1) by pressing both white surfaces
and detach.
Press retaining lug (1) in direction of arrow towards rear and lift
out fuel pump with surge chamber (2).
Installation:
Fuel pump can only be installed in one position.
Make sure lug (4) of mounting engages opening in fuel pump.
Make sure fuel pump (2) is correctly positioned in guides (3).
RA Removing and installing/replacing fuel pump (petrol/gasoline, N52)
BMW AG - TIS
11.02.2013 10:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
