Z Series E86 Z4 3.0Si (N52) COUPE
22 11 011
Replacing left engine mount (N52)
Necessary preliminary tasks:
•
Secure engine in installation position
•
Release engine mounts on left and right from above
•
Remove reinforcement plate
•
Remove underbody protection
Unscrew nut (1).
Tightening torque 22 11 1AZ
.
Installation:
Replace nuts.
Installation:
Installation position of engine mount predetermined by locating pin
(3). Pin (3) is in direction of travel at front.
Heat shield only fitted on right engine mount.
RA Replacing left engine mount (N52)
BMW AG - TIS
08.02.2013 09:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -