Z Series E86 Z4 3.0Si (N52) COUPE
Twist mirror (1) at an angle towards front and right/top.
Swivel left end cap (2) off ball neck in direction of arrow; this
detaches the engagement clip (3) from the metal foot.
Twist mirror (1) at an angle towards front and left/top.
Swivel right end cap (2) off ball neck in direction of arrow; this
detaches the engagement clip from the metal foot.
Installation:
Clips (1) and retaining hooks (2) of end caps (3) must not be
damaged, replace if necessary.
Version with cable (X):
Disconnect plug connection (1).
RA Removing and installing/replacing interior rearview mirror (with mirror arm end
BMW AG - TIS
08.02.2013 13:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
