bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 RA Removing And Installing_replacing Interior Rearview Mirror (with Rain Sensor) > < 10 RA Removing And Installing_replacing Interior Rearview Mirror (with Mirror Arm End|Page 1420
Page 3
background image

Important!

Risk of damage!

Do not pull off rearview mirror (1) from windscreen against
direction of travel and or snap out by turning.

Snap out interior mirror (1) from mirror mount (2) towards front
with increasing pressure (not abruptly) and remove.

Installation:

1.

Twist mirror foot by approx. 45

°

 and fit to mirror mount.

2.

Turn mirror foot until it engages on mirror base.

Only replace with version with remote control for central
locking:

Initialize all transmitters (ignition keys), refer to Owner's
Handbook.

RA  Removing and installing/replacing interior rearview mirror (with mirror arm end

BMW AG - TIS

08.02.2013  13:47

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

11 RA Removing And Installing_replacing Interior Rearview Mirror (with Rain Sensor) > < 10 RA Removing And Installing_replacing Interior Rearview Mirror (with Mirror Arm End|Page 1420