Z Series E86 Z4 3.0Si (N52) COUPE
51 16 060
Removing and installing/replacing interior
rearview mirror (with rain sensor)
Important!
Work may only be carried out at a room/object temperature of
18 ... 28
°
C.
If this cannot be guaranteed (cold/hot countries), it is
necessary to equalize the temperature of the windscreen,
mirror foot and rearview mirror (e.g. car left to stand indoors or
in the shade for at least 30 minutes).
Version with remote control for central locking:
If necessary, disconnect negative lead from battery.
Version with compass:
Check compass function if replacing or after disconnecting interior
mirror plug connection or battery.
If necessary, calibrate compass in interior rearview mirror.
E60 Security version:
Rain sensor is not installed, cable connection is tied back in
roofliner.
Important!
To avoid breaking windscreen:
Snap out (press) rearview mirror only in direction of travel
towards windscreen.
Do not under any circumstances twist the mirror foot when
removing.
Twisting the mirror off the mirror mount will damage the rear
catch.
If the rear catch is damaged, the mirror will be loose when
installed and must be replaced.
RA Removing and installing/replacing interior rearview mirror (with rain sensor)
BMW AG - TIS
08.02.2013 13:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
