Z Series E86 Z4 3.0Si (N52) COUPE
Release screws (1) on left/right.
Raise storage compartment (3) and disconnect all remaining plug
connections.
Lift storage compartment (3) at rear and at same time pull
towards rear and feed out from handbrake lever.
Installation:
Clips (2) must not be missing or damaged.
Installation:
Retaining lugs (2 and 4) of trim (1) and of cap (3) must not
be damaged or missing.
Replacement:
•
Remove trim for storage compartment
RA Removing and installing/replacing storage compartment
BMW AG - TIS
08.02.2013 13:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -