Z Series E86 Z4 3.0Si (N52) COUPE
51 48 ...
Removing and installing/replacing sound
insulation in front door, left or right
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove door trim panel
•
If necessary, remove airbag module in front door
Unfasten cable tie (1).
Using special tool 00 9 317 , lever out sealing bead (2) of
sound insulation (3) completely or if necessary partially.
Installation:
In case of replacement or partial detachments, lay butylene tape
(sourcing reference: BMW Parts Service) depending on the
conditions on inner door panel or sound insulation.
Seal cable penetrations with butylene tape.
RA Removing and installing/replacing sound insulation in front door, left or right
BMW AG - TIS
08.02.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
