Z Series E86 Z4 3.0Si (N52) COUPE
Important!
Do not damage Bowden cable (2) and lock knob control
rod (3).
Note:
Position of butylene tape (1) on sound insulation (2).
Note:
A marking (2) is provided all round on the sound insulation (1).
Butylene tape (3) rests on or inside the marking (2).
Clean the specified adhesive area with adhesive cleaner (sourcing
reference: BMW Parts Service).
Air drying time: 1 minute
Important!
Adhesive area must be dry and free from dust and grease.
Once it has been cleaned, do not touch the adhesive area
with bare hands.
RA Removing and installing/replacing sound insulation in front door, left or right
BMW AG - TIS
08.02.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
