Z Series E86 Z4 3.0Si (N52) COUPE
Secure line (1 and 2) with 6 mm dia. butylene tape (3)
(sourcing reference: BMW Parts Service).
Lay single row of 6 mm dia. butylene tape or double row of 3 mm
dia. tape (sourcing reference: BMW Parts Service) in specified
adhesive area.
Heat butylene tape (hot air blower) and press down firmly on
sound insulation all round.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation in front door, left or right
BMW AG - TIS
08.02.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
