Century V6-3.1L VIN J (2005)
4. Install the relay bracket screws.
Tighten the screws to 1.0 N.m (89 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the I/P compartment.
6. Install the right instrument insulator panel.
4. Install the relay bracket screws.
Tighten the screws to 1.0 N.m (89 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the I/P compartment.
6. Install the right instrument insulator panel.