Century V6-3.1L VIN J (2005)
Fog/Driving Lamp Switch: Service and Repair
FOG LAMP SWITCH REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the left instrument panel insulator.
2. Remove the steering column filler.
3. Disconnect the electrical connector from the fog lamp switch.
4. Press the retaining tabs and remove the fog lamp switch from the steering column filler.
INSTALLATION PROCEDURE
1. Position the fog lamp switch to the steering column filler and press into place to secure.
2. Connect the electrical connector to the fog lamp switch.
3. Install the steering column filler.
4. Install the left instrument panel insulator.
