Electra V6-231 3.8L VIN C SFI (1988)
Inspect
^
For proper completion of repair.
^
For fluid leaks.
BALANCE SHAFT TIMING
1. Turn the camshaft so, with the camshaft sprocket temporarily installed, timing mark is straight down.
2. With the camshaft sprocket and the camshaft gear removed, turn the balance shaft so that the timing mark on the gear points straight down.
3. Install camshaft gear.
4. Align the marks on the balance shaft gear and the camshaft gear by turning the balance shaft (figure 2, view A).
5. Turn the crankshaft so that number one piston is at top dead center.
