Electra V6-231 3.8L VIN C SFI (1988)
Blower Motor: Initial Inspection and Diagnostic Overview
Automatic Climate Controls
NOTE: Try the following checks before doing the System Diagnosis.
1. Check Fuse 7 and Fuse 11 by visual inspection.
2. Check that ground G103 and G200 are clean and tight.
3. Check that Blower Motor and Blower Control Module connectors are mated correctly and firmly seated.
^
Refer to the A/C System / System Diagnosis / Procedures / Functional Test for a guide to normal operation. See: Testing and Inspection
^
Refer to System Diagnosis for diagnostic tests. See: System Diagnosis
