Enclave AWD V6-3.6L (2009)
4. Tighten the hex nut until the stud head is fully seated in the bearing/hub flange.
5. Remove the hex nut and the washers from the wheel stud.
6. Install the brake rotor. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Front Brake Rotor Replacement).
7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Service and Repair).
8. Lower the vehicle.