LaCrosse V6-3.6L (2007)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Brake Pressure Modulator Valve Bracket Replacement
Brake Pressure Modulator Valve Bracket Replacement
Removal Procedure
Caution: Refer to Brake Fluid Irritant Caution in Service Precautions.
Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Service Precautions.
1. Turn the Ignition switch to the OFF position.
2. Remove brake pressure modulator valve (BPMV) and electronic brake control module (EBCM) as an assembly from the BPMV bracket.
3. Remove the 3 BPMV bracket nuts (1, 2, 3) attaching the BPMV bracket (4) to the wheel housing.
4. Remove the BPMV bracket (4) from the vehicle.
Installation Procedure
