LaCrosse V6-3.8L (2009)
6. If the lower hinge is broken, remove the lower hinge bolts from the door side in the specified sequence (3, 2).
7. Remove the lower hinge bolts from the hinge pillar side in the specified sequence (3, 2).
8. Remove the broken hinge from the door.
Installation Procedure
1. Install the new hinge to the door.
Position the hinge to the alignment marks on the hinge pillar and the door.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Install the lower hinge bolts to the hinge pillar side in the specified sequence (3, 2).
Tighten the bolts to 33 Nm (24 lb ft).
