LaCrosse V6-3.8L (2009)
1. Install the outside door handle (1) and the rod (2) to the door.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the outside handle bolt (2) through the latch hole.
Tighten the bolt to 10 Nm (89 lb in).
3. Install the bolts (3) to the rear door handle.
Tighten the bolt to 10 Nm (89 lb in).
4. Install the rear door lock. Refer to Rear Door Lock Replacement (See: Locks/Door Locks/Service and Repair/Rear Door Lock Replacement).
5. Install the outside door handle bolt access tape.
