LaCrosse V6-3.8L (2009)
3. Align the match marks and connect the intermediate shaft to the steering column.
4. Install the upper boot to the ridge around the intermediate shaft pass-through.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
5. Install the upper intermediate steering shaft pinch bolt and tighten to 48 Nm (35 lb ft).
6. Connect the intermediate steering shaft seal onto the steering column.
7. Align the match marks and connect the intermediate steering shaft to the power steering gear stub shaft.
8. Install the lower intermediate steering shaft pinch bolt and tighten to 48 Nm (35 lb ft).
9. Connect the intermediate steering shaft seal onto the power steering gear. Rotate the lower seal as necessary in order to gain maximum clearance.
10. Lower the vehicle.
11. Remove J-42640 - pin from the steering column.
