LaCrosse FWD V6-3.0L (2010)
Note: Install a new power vacuum brake booster pushrod retainer.
4. Install a new power vacuum brake booster pushrod retainer to the power vacuum brake booster pushrod.
Note: Ensure the power vacuum brake booster pushrod retainer is fully seated in the brake pedal arm.
5. Install the power vacuum brake booster pushrod retainer to the brake pedal (1).
6. Install the brake pedal position sensor. Refer to Brake Pedal Position Sensor Replacement (See: Accessories and Optional Equipment/Pedal
Positioning System/Pedal Positioning Sensor/Service and Repair/Brake Pedal Position Sensor Replacement).
7. Connect the accelerator pedal position sensor electrical connector.
8. Install the instrument panel tie bar. Refer to Instrument Panel Tie Bar Replacement (See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Instrument Panel Tie Bar Replacement).