Lucerne V6-3.9L (2009)
Tighten the bolts to 191 Nm (141 lb ft).
6. finish securing the 6 suspension support reinforcement brace bolts (3).
Tighten the bolts to 86 Nm (63 lb ft).
7. Install the brake calipers. Refer to Rear Brake Caliper Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service
and Repair/Removal and Replacement/Rear Brake Caliper Replacement).
8. Install the park brake cables to the suspension support assembly and connect the cables to both calipers. Refer to Parking Brake Rear Cable
Replacement - Left Side (See: Brakes and Traction Control/Parking Brake System/Parking Brake Cable/Service and Repair/Parking Brake Rear
Cable Replacement - Left Side) and Parking Brake Rear Cable Replacement - Right Side (See: Brakes and Traction Control/Parking Brake
System/Parking Brake Cable/Service and Repair/Parking Brake Rear Cable Replacement - Right Side).
9. Install the electronic level control link (2) to the ball stud (1) on the lower control arm.
10. Attach the wheel speed sensor wire to the rear support and connect the electrical connector to each wheel speed sensor.
11. Install the coil springs. Refer to Coil Spring Replacement (See: Steering and Suspension/Suspension/Suspension Spring ( Coil / Leaf )/Service
and Repair/Rear Suspension Coil Spring/Coil Spring Replacement).
12. Install the exhaust system. Refer to Exhaust System Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair).
13. Install the tires and the wheels. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
