Lucerne V6-3.9L (2009)
11. Slowly lower the lower control arm until it bottoms on the support assembly.
12. Using a pry bar, pry under the lower coil spring insulator and remove the coil spring with the insulator.
13. Remove the upper coil spring insulator by pulling downward.
14. Separate the lower control arm insulator from the coil spring.
Installation Procedure
1. Install the upper coil spring insulator to the body.
2. Install the lower coil spring insulator in the control arm.
3. Install the coil spring ensuring that the coil spring insulators are seated in the upper and lower control arms.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
