Lucerne V8-4.6L (2008)
Positive: Service and Repair
Battery Positive Cable Replacement
Removal Procedure
Important:
*
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
*
Always route the replacement cable the same way as the original cable.
1. Remove the surge tank. Refer to Radiator Surge Tank Replacement (LD8) (See: Engine, Cooling and Exhaust/Cooling System/Coolant
Reservoir/Service and Repair).
2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Service and Repair).
3. Remove the carpet. Refer to Front Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair)
andRear Floor Panel Carpet Replacement (See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair).
4. Unsnap the positive battery cable cover (3), and reposition.
5. Loosen the positive battery cable bolt (1).
6. Separate the positive battery cable (2) from the battery.