Park Avenue V6-3.8L SC VIN 1 (2005)
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement - Right
AIR TEMPERATURE ACTUATOR REPLACEMENT - RIGHT
REMOVAL PROCEDURE
1. Remove the right sound insulator.
2. Remove the instrument panel (I/P) compartment.
3. Remove the body control module (BCM) and the HVAC programmer from the brackets and lay aside.
4. Disconnect the electrical connector from the right air temperature actuator.
5. Remove the right air temperature actuator retaining screws (1).
6. Remove the right air temperature actuator.
INSTALLATION PROCEDURE
1. Install the right air temperature actuator.
2. Install the right air temperature actuator retaining screws (1).
Tighten the screws to 1.4 N.m (12 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
