Park Avenue V6-3.8L SC VIN 1 (2005)
Air Register: Service and Repair
DEFROSTER DUCT REPLACEMENT - WINDSHIELD
REMOVAL PROCEDURE
1. Remove the instrument panel (I/P) assembly.
2. Remove the defroster duct retaining screws and nut.
3. Remove the defroster duct.
INSTALLATION PROCEDURE
1. Install the defroster duct.
2. Install the defroster duct screws.
Tighten the screws to 2.3 N.m (23 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the defroster duct mounting nut to the front of dash.
Tighten the nut to 9 N.m (80 lb in).
4. Install the I/P assembly.
