Park Avenue V6-3.8L SC VIN 1 (2005)
Compressor Control Valve Assembly: Service and Repair
Installation
COMPRESSOR CONTROL VALVE ASSEMBLY INSTALL
TOOLS REQUIRED
J 5403 Snap Ring Pliers
1. Coat the O-rings with 525 viscosity refrigeration oil.
2. Using thumb pressure, push the O-rings in place.
3. Install the valve into the case.
4. Using the J 5403 , install the valve retaining ring (5) with the high point of the curved sides against the valve housing.
IMPORTANT: Ensure that the retaining ring is properly seated in the ring groove.
5. Perform a leak test. Refer to Compressor Leak Testing (V5 - Conventional Mount).