Park Avenue V6-3.8L SC VIN 1 (2005)
9. Remove the right air temperature sensor from the air distributor duct by turning counterclockwise 1/4 turn.
10. Disconnect the air temperature sensor electrical connector.
INSTALLATION PROCEDURE
1. Connect the air temperature sensor electrical connector to the sensor.
2. Install the right air temperature sensor into the air distributor duct and turn the sensor clockwise 1/4 turn.
3. Install the air distributor duct to the stud and install the outboard screw.
Tighten the screw to 2 N.m (17 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the air distributor duct center screws (1).
Tighten the screws to 2 N.m (17 lb in).
