Park Avenue V6-3.8L SC VIN 1 (2005)
Discharge Air Temperature Sensor / Switch: Service and Repair
Air Temperature Sensor - Upper Left
AIR TEMPERATURE SENSOR REPLACEMENT - UPPER LEFT
REMOVAL PROCEDURE
1. Remove the outer instrument panel (I/P) trim covers by pulling outward.
2. Remove the left I/P accessory trim plate.
3. Remove the right I/P accessory trim plate.
4. Remove the left I/P trim panel.
5. In order to access the air distributor duct screws, remove the upper fasteners retaining the lower I/P trim.
IMPORTANT: Complete removal of the lower I/P trim is not necessary.
6. Pull the I/P trim off the studs and lower the trim out of the way.
7. Remove the 2 screws (1) at the center of the air distributor duct.
8. Remove the screws at the outboard side of the air distributor duct.
