Park Avenue V6-3.8L SC VIN 1 (2005)
Evaporator Core: Service and Repair
EVAPORATOR CORE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the HVAC module assembly. See: Housing Assembly HVAC/Service and Repair
2. Remove the seal from around the heater core and the evaporator tubes.
3. Remove the upper HVAC case screws.
4. Separate the HVAC module case halves.
5. Remove the evaporator core.
INSTALLATION PROCEDURE
1. Add the proper amount of refrigerant oil to the evaporator. Refer to Refrigerant System Capacities.
2. Install the evaporator core.
3. Align and connect the HVAC module case halves.
4. Install the upper HVAC module case screws.
Tighten the screws to 1.4 N.m (12 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.