Park Avenue V6-3.8L SC VIN 1 (2005)
Heater Hose: Service and Repair
Heater Pipe Adapter - Outlet
HEATER PIPE ADAPTER REPLACEMENT - OUTLET
TOOLS REQUIRED
J 38185Hose Clamp Pliers
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
2. Disconnect the heater hose from the heater outlet pipe adapter using the J 38185.
3. Remove the bolt from the heater pipe adapter (2).
4. Remove the heater outlet pipe adapter (2) from the engine.
INSTALLATION PROCEDURE
1. Install the heater outlet pipe adapter (2) to the engine.
2. Install the heater pipe adapter bolt.
Tighten the bolt to 10 N.m (89 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
