Park Avenue V6-3.8L SC VIN 1 (2005)
5. Install the evaporator hose into the clip (1) at the frame rail and fasten the clip.
IMPORTANT: If the clip was damaged during removal, install a new clip.
6. Install the evaporator hose to the condenser.
7. Install the evaporator hose bolt to the condenser.
Tighten the bolt to 24 N.m (18 lb ft).
8. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
9. Leak test the fittings of the A/C component using the J 39400-A.
