Park Avenue V6-3.8L SC VIN 1 (2005)
11. Disconnect the blower control module (1) electrical connector.
12. Disconnect the instrument panel to HVAC harness connector.
13. Remove the HVAC module retaining nuts (1-5) from the I/P.
14. Remove the HVAC module from the vehicle.
INSTALLATION PROCEDURE
1. Install the HVAC module to the vehicle.
2. Install the HVAC module nuts to the I/P (1-5).
Tighten the nuts to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the electrical connector to the blower control module (1).
4. Connect the I/P to HVAC module electrical connector.
5. Install the defroster duct.
