Park Avenue V6-3.8L SC VIN 1 (2005)
Negative: Service and Repair
Replacement Procedure (Top Post)
BATTERY NEGATIVE CABLE REPLACEMENT (TOP POST)
REMOVAL PROCEDURE
IMPORTANT:
-
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
-
Always route the replacement cable the same way as the original cable.
1. Disconnect the battery negative cable from the negative battery post.
2. Disconnect the battery negative cable from the side rail.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Disconnect the battery negative cable from the engine block.
5. Disconnect the electrical harness conduit wire ties from the engine frame.
6. Remove the battery negative cable from the electrical harness conduit.
7. Remove the negative battery cable from the vehicle.
INSTALLATION PROCEDURE
1. Install the battery negative cable into the electrical harness conduit.