Park Avenue V6-3.8L SC VIN 1 (2005)
2. Connect the electrical harness conduit wire ties to the engine frame.
3. Install the bolt securing the battery negative cable to the engine block.
Tighten the battery negative cable to engine block bolt to 25 N.m (18 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Lower the vehicle.
5. Install the bolt securing the battery negative cable to the side rail.
Tighten the battery negative cable to side rail bolt to 20 N.m (15 lb ft).
6. Connect the battery negative cable to the battery negative post.