Park Avenue V6-3.8L SC VIN 1 (2005)
Positive: Service and Repair
BATTERY POSITIVE CABLE REPLACEMENT (TOP POST)
REMOVAL PROCEDURE
IMPORTANT:
-
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
-
Always route the replacement cable the same way as the original cable.
1. Disconnect the battery negative cable from the negative battery post.
2. Lift the positive battery post protective cover.
3. Disconnect the battery positive cable from the positive battery post.
4. Remove the battery positive cable protector cover from the underhood fuse block.
5. Disconnect the battery positive cable from the positive battery terminal on the underhood fuse block.
6. Raise and support the vehicle. Refer to Vehicle Lifting.
7. Disconnect the battery positive cable from the starter.