Park Avenue V6-3.8L VIN K (1995)
Air Door Actuator / Motor: Service and Repair
(Actuator) Driver Air Mix Valve
Programmer Assembly
REMOVE OR DISCONNECT
1. Programmer, Refer to Programmer Service and Repair. See: Control Module HVAC/Service and Repair
2. Cover from programmer case (snaps open).
3. Electrical connector.
4. Screws and driver air mix valve actuator from vehicle.
INSTALL OR CONNECT
1. Screws after positioning driver air mix valve actuator.
-
Tighten screws to 1.4 Nm (12 lb. in.).
2. Electrical connector.
3. Cover to programmer case (snaps closed).
4. Programmer, Refer to Programmer Service and Repair. See: Control Module HVAC/Service and Repair
