Rainier 2WD V8-5.3L VIN P (2004)
1. Install the mode actuator.
2. Connect the electrical connector.
3. Install the screws to the mode actuator.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screws to 1.9 N.m (17 lb in).
4. Install the air outlet duct to the console.
5. Install the screw to the air outlet duct.
Tighten
Tighten the screw to 1.9 N.m (17 lb in).
6. Install the console.