Rainier AWD V8-5.3L VIN P (2004)
Seat Cushion: Service and Repair
Seat Cushion Panel Replacement - Rear No. 2
Seat Cushion Panel Replacement - Rear No. 2
Removal Procedure
1. Remove the two rear seat cushion bolts (2) securing the rear seat cushion assembly (1) to the seat latch rod (3).
2. Remove the seat cushion assembly.
3. Remove the pull handle (1).
4. Remove the J-strips (2) securing the seat cushion cover to the seat cushion panel.
5. Remove the seat cushion panel from the pad and cover.
Installation Procedure
1. Install the seat cushion panel on the pad and cover.
2. Install the J-strips (2) securing the seat cushion cover to the seat cushion panel.
3. Install the pull handle (1).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the rear seat cushion assembly (1) to the seat latch rod (3) with two rear seat cushion bolts (2).
Tighten the rear seat cushion bolts to 11 N.m (97 lb in).
