Rainier AWD V8-5.3L VIN P (2004)
6. Install J1859-A and J-36541-A to the steering wheel.
7. Remove the steering wheel using J1859-A and J-3654 1-A.
Installation Procedure
1. Install the steering wheel to the steering wheel shaft.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the retaining nut that secures the steering wheel to the steering wheel shaft.
Tighten the retaining nut to 41 Nm (30 ft. lbs.).
3. Connect the steering wheel electrical connector.
4. Install the horn plunger to the steering column.
5. Install the inflator module.
6. Enable the SIR system.
