Rendezvous AWD V6-3.4L VIN E (2005)
14. Connect the vacuum hoses to the EVAP canister purge solenoid valve.
15. Connect the throttle body heater hoses.
16. Connect the engine left side spark plug wire harness attachment clip.
17. Connect the engine left side spark plug wires.
18. Connect the wiring harness connectors to the throttle body.
19. Install the accelerator control and cruise control cables with bracket to the throttle body.
20. Install the throttle body air inlet duct.
21. Fill the cooling system with engine coolant. Refer to Draining and Filling Cooling System.
