Rendezvous AWD V6-3.4L VIN E (2005)
Alternator: Service and Repair
Generator Replacement
GENERATOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the battery ground (negative) cable from the battery.
2. Rotate and secure the engine forward to access rear generator bolts. Refer to Rotating the Engine for Service Access in Engine - 3.4L.
3. Remove the generator B+ terminal nut.
4. Remove the generator B+ lead.
5. Remove the generator electrical connector.
6. Remove the drive belt from the generator.
7. Remove the generator front bolt.
8. Remove the generator rear bolts.
9. Remove the generator from the generator bracket and position the generator above the drive axle.
10. Remove the drive belt tensioner.
11. Remove the generator bracket.
12. Remove the power steering pipes from the power steering pipe retainer.
13. Remove the fuel pressure test port (schrader valve) cap from the fuel injector rail.
14. Remove the power steering pump and reposition the power steering pump in front of the timing chain cover in order to provide access for the
