Rendezvous AWD V6-3.4L VIN E (2005)
6. Install the lower ball joint to the knuckle.
7. Notice: Refer to Fastener Notice in Service Precautions.
Install the lower ball joint nut.
Tighten the lower ball joint nut to 60 Nm (44 ft. lbs.).
8. Install the stabilizer shaft link to the lower control arm.
9. Install the speed sensor connector mounting bracket.
10. Connect the speed sensor harness to the control arm.
11. Connect the speed sensor harnesses.
12. Connect the shock absorber to the lower control arm.
13. Connect the height sensor link to the lower control arm as necessary.
14. Install the brake caliper.
15. Install the rear wheel.
16. Inspect and adjust the rear camber and toe angles as necessary.
17. Lower the vehicle.
