buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Inflatable Restraint Sensing And Diagnostic Module <--> [Air Bag Control Module]|Locations|Page 1562 > < Inflatable Restraint Sensing And Diagnostic Module <--> [Air Bag Control Module]|Locations|Page 1560

Rendezvous AWD V6-3.6L VIN 7 (2004)

Page 2
background image

8. Remove the SDM mounting fasteners (1).
9. Remove the SDM (2) from the vehicle.

INSTALLATION PROCEDURE

1. Remove any dirt, grease, and other contaminants from the mounting surface.
2. Install the SDM (2) horizontally to the vehicle.
3. Point the arrow on the SDM toward the front of the vehicle.

NOTE:  Refer to Fastener Notice in Service Precautions.

4. Install the SDM mounting fasteners (1).

Tighten

Inflatable Restraint Sensing And Diagnostic Module <--> [Air Bag Control Module]|Locations|Page 1562 > < Inflatable Restraint Sensing And Diagnostic Module <--> [Air Bag Control Module]|Locations|Page 1560