Rendezvous FWD V6-3.5L VIN L (2006)
Trim Panel: Service and Repair
Trim Panel Replacement - Cargo Area Side
TRIM PANEL REPLACEMENT - CARGO AREA SIDE
REMOVAL PROCEDURE
1. Release the door with the handle and remove the door.
2. Remove the screws holding the access plate.
3. Disconnect the electrical connectors from the panel.
4. Remove the panel.
INSTALLATION PROCEDURE
1. Align the panel with the access hole.
2. Connect the electrical connectors to the panel.
3. Screw the panel to the cargo side area.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2 N.m (18 lb in).
4. Install the door access panel cover and lock the door with handle.