Rendezvous FWD V6-3.5L VIN L (2006)
7. Remove the sunroof actuator from the sunroof module.
INSTALLATION PROCEDURE
1. Install the sunroof actuator to the sunroof module.
NOTE: Refer to Fastener Notice in Service Precautions.
Install the sunroof actuator bolts.
Tighten the sunroof actuator bolts to 4 N.m (35 lb in).
2. Connect the electrical connector to the sunroof actuator.
3. Remove the sunroof timing pins.
4. Install the front screws to the sunroof window panel.
5. Check the sunroof for proper operation.
6. Install the headliner.
