Rendezvous FWD V6-3.5L VIN L (2006)
Hose/Line HVAC: Service and Repair
Heater Pipe Replacement - Inlet
HEATER PIPE REPLACEMENT - INLET
REMOVAL PROCEDURE
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill) in Cooling
System.
2. Remove the air cleaner outlet duct.
3. Remove the thermostat bypass pipe.
4. Disconnect the inlet heater hose (1) from the inlet pipe (2).
5. Remove the heater inlet pipe nut.
6. Remove the inlet pipe from the thermostat housing.
7. Remove and discard the O-ring seal.
INSTALLATION PROCEDURE