Rendezvous FWD V6-3.5L VIN L (2006)
1. Install the engine harness electrical connectors (4) to the PCM.
2. Install the PCM (2) into the air cleaner assembly (3).
3. Install the air cleaner assembly cover (1).
4. Install the air cleaner assembly cover screws.
NOTE: Refer to Fastener Notice.
Tighten the screws to 4 N.m (35 lb in).
5. Install the left diagonal brace.
6. Connect the negative battery cable.
7. If a NEW PCM was installed, program the PCM. Refer to Control Module References. See: Testing and Inspection/Programming and Relearning