Rendezvous FWD V6-3.5L VIN L (2006)
Steering Shaft: Service and Repair
Ignition Switch Replacement
Ignition Switch Replacement
Removal Procedure
1. Disable the SIR system.
2. Remove the steering column trim covers.
3. Remove the ignition lock cylinder.
4. Remove the theft deterrent module from the lock cylinder housing.
5. Remove the screws (2) from the ignition switch (1).
6. Remove the ignition switch (1) from the ignition lock cylinder case.
7. Disconnect the ignition switch electrical connector.
Installation Procedure
