Skylark L4-144 2.4L DOHC VIN T SFI (1997)
17. Remove J 36008-A from the camshaft sprockets.
Notice: The timing chain on the engine is not to be replaced with the timing chain from any other model year. The timing sprockets are different on this
engine and the shape of the links matches the sprockets. Engine damage may result if the wrong timing chain is used. The timing chain and the crankshaft
sprocket must be marked so that they are reinstalled with the same side facing out at the time of reassembly.
18. Rotate the crankshaft clockwise two full rotations. Align the crankshaft keyway with the mark on the cylinder block and reinstall the J 36008-A
Camshaft Sprocket Alignment Pins. The alignment pins will slide in easily if the engine is timed correctly.
19. Install the timing chain guides.
