Skylark V6-173 2.8L VIN X 2-bbl (1984)
Compressor Clutch: Service and Repair
Removal
1.
Support compressor in holding fixture J-33026 or equivalent.
2.
Using clutch hub holding tool J-33027 or equivalent, prevent clutch hub and drive plate assembly from turning. Remove shaft nut using shaft nut
socket J-33022 or equivalent.
3.
Thread clutch plate and hub assembly removing tool J-33013 or equivalent onto hub with center screw forcing tip located to thrust against end of
shaft. Hold body of remover with wrench and turn center screw into remover body to remove clutch plate and hub assembly.
4.
Remove shaft key and retain for assembly.
